| A-A-272 |
CAULKING COMPOUNDS |
| A-A-373A |
GLAZING COMPOUNDS, SASH (METAL) FOR BACK BEDDING & FACE GLAZING (NOT |
|
FOR CHANNEL OR STOP GLAZING) |
| A-A-529 |
ADHESIVE AND SEALING COMPOUND, CELLULOSE NITRATE BASE SOLVENT TYPE |
| A-A-1556 |
SEALING COMPOUND (ELASTOMERIC JOINT SEALANTS) |
| A-A-1668 |
BAG, PLASTIC, GENERAL PURPOSE, FLAT |
| A-A-1827 |
PLASTIC SHEET (POLYETHYLENE, HEAT SHRINKABLE) |
| L-C-110J |
CELLOPHANE (COATED AND NON-COATED REGENERATED CELLULOSE FILM) |
| L-P-315C(2) |
PIPE, PLASTIC (POLYETHYLENE, PE, SDR-PR) |
| L-P-00315D |
PIPE AND TUBING, NONMETALLIC (PLASTIC) |
| L-P-320B(1) |
PIPE AND FITTINGS, PLASTIC (POLYVINYL CHLORIDE, PVC, DRAIN, WASTE AND VENT, |
|
DWV) |
| L-P-322B(1) |
PIPE AND FITTINGS, PLASTIC (ACRYLONITRILE BUTADIENE STYRENE, ABS, DRAIN, |
|
WASTE AND VENT, DMV) |
| L-P-349C |
PLASTIC MOLDING AND EXTRUSION MATERIAL, CELLULOSE ACETATE BUTYRATE |
| L-P-370C(2) |
PLASTIC FILM, SHEET AND STRIP (POLYVINYL CHLORIDE, COPOLYMER OF |
|
VINYLIDENE CHLORIDE AND VINYL CHLORIDE, OR POLYETHYLENE) |
| L-P-375C(3) |
PLASTIC FILM FLEXIBLE, VINYL CHLORIDE |
| L-P-377B |
PLASTIC SHEET AND STRIP, POLYESTER |
| L-P-378D(1) |
PLASTIC SHEET AND STRIP, THIN GAUGE, POLYOLEFIN |
| L-P-380C |
PLASTIC MOLDING MATERIAL METHACRYLATE |
| L-P-383(1) |
PLASTIC MATERIAL, POLYESTER RESIN, GLASS FIBRE BASE, LOW PRESSURE |
|
LAMINATED |
| L-P-385C |
PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYCHLOROTRIFLUOROETHYLENE |
| L-P-386C |
PLASTIC MATERIAL, CELLULAR, URETHANE (FLEXIBLE) |
| L-P-387A(1) |
PLASTIC SHEET, LAMINATED, THERMOSETTING (FOR DESIGNATION PLATES) |
| L-P-389A(1) |
PLASTIC MOLDING MATERIAL, FEP FLUOROCARBON, MOLDING AND EXTRUSION |
| L-P-390C(1) |
PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS |
|
(LOW, MEDIUM, AND HIGH DENSITY) |
| L-P-391D |
PLASTIC SHEETS, RODS AND TUBING, RIGID CAST, METHACRYLATE (MULTI- |
|
APPLICATION) |
| L-P-392A |
PLASTIC MOLDING MATERIAL, ACETAL, INJECTION AND EXTRUSION |
| L-P-393A(2) |
PLASTIC MOLDING MATERIAL, POLYCARBONATE, INJECTION AND EXTRUSION |
| L-P-394B |
PLASTIC MOLDING MATERIAL, PROPYLENE PLASTICS, INJECTION AND EXTRUSION |
| L-P-395C |
PLASTIC MOLDING AND EXTRUSION MATERIAL, NYLON, GLASS FIBRE REINFORCED |
| L-P-396B |
PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYSTYRENE |
| L-P-397C |
PLASTIC MOLDING MATERIAL, CELLULOSE ACETATE |
| L-P-398B |
PLASTIC MOLDING MATERIAL, STYRENE-BUTADIENE |
| L-P-399B |
PLASTIC MOLDING AND EXTRUSION MATERIAL, STYRENE ACRYLONITRILE |
|
COPOLYMERS |
| L-P-403C |
PLASTIC MOLDING MATERIAL, POLYTETRAFLUOROETHYLENE (TFE FLUOROCARBON) |
| L-P-410A(3) |
PLASTIC POLYAMIDE (NYLON), RIGID RODS, TUBES, FLATS, MOLDED AND CAST PARTS |
| L-P-504D |
PLASTIC SHEET AND FILM, CELLULOSE ACETATE |
| L-P-506A |
PLASTIC SHEET AND FILM, POLYSTYRENE, BIAXIALLY ORIENTED |
| L-P-508H |
PLASTIC SHEET, LAMINATED, DECORATIVE AND NON-DECORATIVE |
| L-P-509A(1) |
PLASTIC SHEET, ROD AND TUBE, LAMINATED, THERMOSETTING |
| L-P-511(1) |
PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, |
|
PHENOLIC-RESIN, POST-FORMING |
| L-P-512C |
PLASTIC SHEET (SHEETING), POLYETHYLENE |
| L-P-513C |
PLASTIC SHEET AND INSULATION SHEET, ELECTRICAL (LAMINATED, |
|
THEMOSETTING, PAPER BASE PHENOLIC RESIN) |
| L-P-516A |
PLASTIC SHEET AND PLASTIC ROD, THERMOSETTING, CAST |
| L-P-517C(1) |
PLASTIC SHEET, SCRIBE COATED |
| L-P-519C |
PLASTIC SHEET, TRACING, GLAZING AND MATTE FINISH |
| L-P-523D |
PLASTIC SHEET AND FILM, FEP FLUOROCARBON, EXTRUDED |
| L-P-527B |
PLASTIC SHEET, STYRENE BUTADIENE |
| L-P-528B |
PLASTIC SHEET, PRESSURE SENSITIVE, ADHESIVE COATED, PAPER BACKED |
| L-P-535E |
PLASTIC SHEET (SHEETING), PLASTIC STRIP POLY(VINYL CHLORIDE) AND POLY(VINYL |
|
CHLORIDE-VINYL ACETATE), RIGID |
| L-P-1035A |
PLASTIC MOLDING MATERIAL, VINYL CHLORIDE POLYMER AND VINYL CHLORIDE |
|
VINYL ACETATE COPOLYMER, RIGID |
| L-P-1036A |
PLASTIC ROD, SOLID: PLASTIC TUBES AND TUBING, HEAVY WALLED: POLYVINYL |
|
CHLORIDE, RIGID |
| L-P-1040B |
PLASTIC SHEETS AND STRIPS (POLYVINYL FLUORIDE) |
| L-P-1041A |
PLASTIC MOLDING AND EXTRUSION MATERIAL, VINYLIDENE CHLORIDE-VINYL |
|
CHLORIDE COPOLYMER |
| L-P-1183B |
PLASTIC MOLDING MATERIAL, ACRYLONITRILE BUTADIENE STYRENE (ABS), RIGID |
| L-P-1221A(1) |
PIPE AND FITTINGS, PLASTIC, RIGID (STYRENE RUBBER, DRAIN) |
| L-T-790B |
TUBE, NONMETALLIC, POLYVINYL CHLORIDE (PVC), FLEXIBLE (FOR LABORATORY |
|
AND MEDICAL USE) |
| P-P-560B |
POLISH, PLASTIC |
| W-C-1094A |
CONDUIT AND CONDUIT FITTINGS PLASTIC, RIGID |
| HH-I-524C |
INSULATION BOARD, THERMAL (POLYSTYRENE) |
| TT-C-598B(2) |
CAULKING COMPOUND, OIL AND RESIN BASE TYPE (FOR MASONRY AND OTHER |
|
STRUCTURES) |
| TT-C-00598(1) |
CAULKING COMPOUND, OIL AND RESIN BASE TYPE (FOR BUILDING CONSTRUCTION) |
| TT-C-1796A |
CAULKING COMPOUNDS, METAL SEAM AND WOOD SEAM |
| TT-S-227B(1) |
SEALING COMPOUND, RUBBER BASE, TWO COMPONENT (FOR CAULKING, SEALING, |
|
AND GLAZING IN BUILDING CONSTRUCTION) |
| TT-S-230A(1) |
SEALING COMPOUND, SYNTHETIC RUBBER BASE, SINGLE COMPONENT, |
|
CHEMICALLY CURING FOR CAULKING, SEALING, AND GLAZING IN BUILDING |
|
CONSTRUCTION |
| TT-S-00227E(3) |
SEALING COMPOUND, ELASTOMETRIC TYPE, MULTI-COMPONENT (FOR CAULKING, |
|
SEALING, AND GLAZING IN BUILDING CONSTRUCTION) |
| TT-S-001543A |
SEALING COMPOUND, SILICONE RUBBER BASE (FOR CAULKING, SEALING, AND |
|
GLAZING IN BUILDINGS AND OTHER STRUCTURES) |
| TT-S-001657 |
SEALING COMPOUND, SINGLE COMPONENT, BUTYL RUBBER BASED, SOLVENT |
|
RELEASE TYPE (FOR BUILDINGS AND OTHER TYPES OF CONSTRUCTION) |
| TT-S-1732 |
SEALING COMPOUND, PIPE JOINT AND THREAD, LEAD FREE GENERAL PURPOSE |
| ZZ-M-1538A |
MAT, FLOOR, PLASTIC (FOR CHAIRS) |
| ZZ-T-831D |
TUBING, RUBBER AND PLASTIC |
| MMM-A-121 |
ADHESIVE, BONDING VULCANIZED SYNTHETIC RUBBER TO STEEL |
| MMM-A-122C |
ADHESIVE, BUTADIENE-ACRYLONITRILE BASE, GENERAL PURPOSE |
| MMM-A-130B |
ADHESIVE, CONTACT |
| MMM-A-132(1) |
ADHESIVE, HEAT RESISTANT, AIRFRAME, STRUCTURAL, METAL TO METAL |
| MMM-A-134 |
ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING |
| MMM-A-189B |
ADHESIVE, SYNTHETIC-RUBBER, THERMOPLASTIC, GENERAL PURPOSE |
| MMM-A-1058A |
ADHESIVE, RUBBER BASE, (IN PRESSURIZED DISPENSERS) |
| MMM-A-1617(2) |
ADHESIVE, RUBBER BASE, GENERAL PURPOSE |
| PPP-B-26E(2) |
BAG, PLASTIC, GENERAL PURPOSE |
