| Q |
MIL-M-14G |
MOLDING PLASTICS AND MOLDED PLASTIC PARTS, THERMOSETTING |
|
MIL-P-79C(2) |
PLASTIC ROD AND TUBE, THERMOSETTING, LAMINATED |
|
MIL-W-80C |
WINDOW, OBSERVATION, ACRYLIC BASE, ANTI-ELECTROSTATIC, TRANSPARENT |
|
|
(INDICATING INSTRUMENT) |
| BQ |
MIL-I-631D(5) |
INSULATION, ELECTRICAL, SYNTHETIC RESIN COMPOSITION, NON-RIGID |
|
MIL-I-742F(1) |
INSULATION BOARD, THERMAL, FIBROUS GLASS |
| Q |
MIL-P-997D(2) |
PLASTIC, LAMINATED, THERMOSETTING, ELECTRICAL INSULATION, SHEETS, |
|
|
GLASS |
|
|
CLOTH, SILICONE RESIN |
|
MIL-Y-1140H |
YARN, CORD, SLEEVING, CLOTH, AND TAPE-GLASS |
|
MIL-F-1148B(2) |
FIBRE, VULCANIZED, ELECTRICAL AND MECHANICAL GRADES |
|
MIL-P-2296B |
PLASTIC TUBE, POLYTETRAFLUOROETHYLENE, (TFE-FLUOROCARBON RESIN). |
|
|
HEAVY WALLED |
| * |
MIL-P-2524A |
GLASS FIBRE BASE-EPOXY RESIN LOW PRESSURE LAMINATED PLASTIC |
| * |
MIL-P-3086 |
NON-RIGID POLYAMIDE (NYLON) RESIN |
| * |
MIL-P-3115B |
THERMOSET PHENOLIC SHEET, PAPER REINFORCED |
|
MIL-I-358D |
INSULATION TAPE, ELECTRICAL GLASS FIBRE (RESIN FILLED), AND CORD, |
|
|
FIBROUS GLASS |
|
MIL-I-3190B(1) |
INSULATION SLEEVING, ELECTRICAL , FLEXIBLE, TREATED |
|
MIL-P-3409(1) |
PLASTIC, MOLDING, RIGID THERMOPLASTIC, POLYDICHLOROSTYRENE, |
|
|
ELECTRONIC COMMUNICATIONS |
| * |
MIL-P-3413 |
SUPERSEDED BY LM-520 AND LP-396 |
| * |
MIL-P-3803 |
SUPERSEDED BY LP-512 |
|
MIL-I-3825B(3) |
INSULATION TAPE, ELECTRICAL, SELF FUSING, FOR USE IN ELECTRONIC |
|
|
COMMUNICATIONS AND ALLIED EQUIPMENT |
| * |
MIL-P-3827 |
SUPERSEDED BY LM-525 |
| QL |
MIL-P-4640A(3) |
PLASTIC FILM, POLYETHYLENE, FOR BALLOON USE |
| Q |
MIL-P-5425D |
PLASTIC MATERIAL, SHEET, ACRYLIC, HEAT RESISTANT |
| L |
MIL-P-5431A(1) |
PLASTIC, PHENOLIC, GRAPHITED, SHEETS, RODS, TUBES, AND SHAPES |
| * |
MIL-P-6264B |
VINYL COPOLYMERS, UNPLASTICIZED, UNPIGMENTED, AND UNFILLED |
|
MIL-P-6997B(1) |
PLASTIC, WORKING AND INSTALLATION OF TRANSPARENT SHEET, GENERAL |
|
|
SPECS, FOR (ASG) |
|
MIL-I-7444D |
INSULATION SLEEVING, ELECTRICAL , FLEXIBLE |
|
MIL-P-8045B(3) |
PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL |
| * |
MIL-P-8059A |
THERMOSET PHENOLIC RESIN SHEETS AND TUBES |
| BL |
MIL-P-008184 |
PLASTIC SHEET, ACRYLIC, MODIFIED |
| Q |
MIL-P-8184C |
PLASTIC SHEET, ACRYLIC, MODIFIED |
| * |
MIL-P-8257 |
POLYESTER BASE, CAST TRANSPARENT SHEET, THERMOSETTING |
|
MIL-A-8576C |
ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC |
|
MIL-P-8587A |
PLASTIC, SHEET, COLORED, INSTRUMENT FLYING TRAINING |
| * |
MIL-P-8655A |
THERMOSET PHENOLIC SHEET, POSTFORMING COTTON REINFORCED |
| * |
MIL-P-9969 |
POLYURETHANE, RIGID, UNICELLULAR, FOAM-IN-PLACE FOR PACKAGING |
|
MIL-P-12420C |
PLASTIC MATERIAL, CELLULAR, ELASTOMERIC |
|
MIL-P-13436A(1) |
PLASTIC SHEET, FILLED PHENOLIC, UNCURED |
| * |
MIL-P-13491 |
POLYSTYRENE SHEET, ROD, AND TUBE |
|
MIL-P-13949/1 |
PLASTIC SHEET, BASE MATERIAL PX, PAPER BASE, EPOXY RESIN, FLAME |
|
|
RETARDANT, COPPER CLAD |
|
MIL-P-13949/3A |
PLASTIC SHEET, BASE MATERIAL GE, GLASS BASE, EPOXY RESIN, GENERAL |
|
|
PURPOSE, COPPER CLAD |
|
MIL-P-13949/8B(1) |
PLASTIC SHEET, BASE MATERIAL GT, GLASS BASE, POLYTETRAFLUORO- |
|
|
ETHYLENE, FLAME RETARDANT, COPPER CLAD |
| Q |
MIL-P-13949F(3) |
PLASTIC SHEET LAMINATED, METAL CLAD, (FOR PRINTED WIRING) GENERAL |
|
|
SPECIFICATION FOR |
| L |
MIL-P-14790 |
PLASTIC SHEET AND STRIP (POLYOLEFIN) (FOR USE IN AMMUNITION) |
|
MIL-P-15035C(4) |
PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, |
|
|
PHENOLIC RESIN |
| Q |
MIL-P-15037E(3) |
PLASTIC SHEET, LAMINATED, THERMOSETTING, GLASS CLOTH, MELAMINE RESIN |
|
MIL-P-15047C |
PLASTIC MATERIAL, LAMINATED, THERMOSETTING SHEETS, NYLON FABRIC |
|
|
BASE, PHENOLIC RESIN |
|
MIL-I-15126F(2) |
INSULATION TAPE, ELECTRICAL, PRESSURE SENSITIVE ADH, AND PRESSURE |
|
|
SENSITIVE THERMOSETTING ADH. |
| Q |
MIL-P-15280H |
PLASTIC MATERIAL, UNICELLULAR, (SHEET AND TUBE) |
| * |
MIL-P-16413 |
METHYL METHACRYLATE MOLDING MATERIALS |
| * |
MIL-P-16414 |
CELLULOSE ACETATE BUTYRATE MOLDING |
| * |
MIL-P-16416 |
CELLULOSE ACETATE MOLDING MATERIAL |
| * |
MIL-P-17091B |
POLYAMIDE (NYLON) RESIN RODS, SHEETS |
| L |
MIL-P-17171D |
PLASTIC, LAMINATE, DECORATIVE, HIGH PRESSURE |
| L |
MIL-I-17276A |
INHIBITOR, CELLULOSE ACETATE, EXTRUDED |
| L |
MIL-P-17549D |
PLASTIC LAMINATES, FIBROUS GLASS REINFORCED, MARINE STRUCTURAL |
| * |
MIL-P-17638 |
PVC SHEET - HIGH IMPACT |
|
MIL-I-18057A(1) |
INSULATION SLEEVING, ELECTRICAL, FLEXIBLE, GLASS FIBRE, SILICONE |
|
|
RUBBER TREATED |
| L |
MIL-P-18080A(1) |
PLASTIC SHEET, VINYL, FLEXIBLE, TRANSPARENT, OPTICAL QUALITY |
| Q |
MIL-P-18177C(1) |
PLASTIC SHEET, LAMINATED, THERMOSETTING, GLASS FIBRE BASE, EPOXY |
|
|
RESIN |
| Q |
MIL-P-18324D(2) |
PLASTIC MATERIAL, LAMINATED PHENOLIC, FOR BEARINGS (WATER OR GREASE |
|
|
LUBRICATION) |
| * |
MIL-N-18352 |
NYLON PLASTIC, FLEXIBLE MOLDED OR EXTRUDED |
| * |
MIL-I-18622A |
INSULATION TAPE, ELECTRICAL, PRESSURE SENSITIVE SILICONE, RUBBER |
|
|
TREATED |
|
MIL-I-18746B |
INSULATION TAPE, GLASS FABRIC, POLYTETRAFLUOROETHYLENE COATED |
| * |
MIL-M-19093 |
MOLDING PLASTICS, POLYAMIDE (NYLON), AND MOLDED AND EXTRUDED |
|
|
POLYAMIDE |
| * |
MIL-P-19119 |
PVC PIPE - HIGH IMPACT |
| Q |
MIL-P-19161A(1) |
PLASTIC SHEET, LAMINATED, GLASS CLOTH POLYTETRAFLUOROETHYLENE |
|
|
RESIN |
| Q |
MIL-I-19166C(1) |
INSULATION TAPE, ELECTRICAL, HIGH-TEMPERATURE GLASS FIBRE, PRESSURE |
|
|
SENSITIVE |
| * |
MIL-P-19336C |
PLASTIC SHEETS, POLYETHYLENE, VIRGIN AND BORATED, NEUTRON SHIELDING |
| Q |
MIL-P-19468C |
PLASTIC ROD, POLYTETRAFLUOROETHYLENE, MOLDED AND EXTRUDED |
|
MIL-P-19644C |
PLASTIC MOLDING MATERIAL (POLYSTYRENE FOAM, EXPANDED BEAD) |
|
MIL-P-19735B |
PLASTIC MATERIAL, MOLDING, ACRYLIC, COLORED AND WHITE, HEAT |
|
|
RESISTANT, FOR LIGHTING FIXTURES |
| * |
MIL-P-19833B |
GLASS FILLED DIALLYLPTHLATE RESIN |
| L |
MIL-P-19904A |
PLASTIC SHEET, ACRYLONITRILE BUTADIENE STYRENE COPOLYMER, RIGID |
|
MIL-P-20689C |
PLASTIC, PLASTISOL (FOR COATING METALLIC OBJECTS) |
| * |
MIL-M-20693A |
PLASTIC MOLDING MATERIAL, RIGID, POLYAMIDE |
| * |
MIL-P-21094B |
CELLULOSE ACETATE, OPTICAL QUALITY |
| * |
MIL-P-21105C |
PLASTIC SHEET, ACRYLIC, UTILITY GRADE |
|
MIL-P-21347D |
PLASTIC MOLDING MATERIAL, POLYSTYRENE, GLASS FIBRE REINFORCED |
| * |
MIL-M-21470 |
POLYCHLOROTRIFLUOROETHYLENE RESIN FOR MOLDING |
| Q |
MIL-I-21557B |
INSULATION SLEEVING, ELECTRICAL, FLEXIBLE, GLASS FIBRE, VINYL TREATED |
|
MIL-P-21922B(1) |
PLASTIC RODS AND TUBES, POLYETHYLENE |
| * |
MIL-P-22035 |
PLASTIC SHEET, POLYETHYLENE |
| Q |
MIL-I-22076B(1) |
INSULATION TUBING, ELECTRICAL NON-RIGID, VINYL, VERY LOW TEMPERATURE |
|
|
GRADE |
| * |
MIL-P-22096A |
PLASTIC, POLYAMIDE (NYLON) FLEXIBLE MOLDING AND EXTRUSION MATERIAL |
| * |
MIL-I-22129C |
INSULATION SLEEVING, ELECTRICAL, NON-RIGID TEFLON TFE RESIN |
|
MIL-P-22241B |
PLASTIC SHEET AND FILM POLYTETRAFLUOROETHYLENE (TFE |
|
|
FLUOROCARBON RESIN) |
| * |
MIL-P-22242 |
CANCELED - REFER TO MIL-P-22241 |
| * |
MIL-P-22270 |
PLASTIC FILM, POLYESTER, POLYETHYLENE COATED (FOR I.D. CARDS) |
|
MIL-P-22296B |
PLASTIC TUBE/TUBING POLYTETRAFLUOROETHYLENE (TFE FLUOROCARBON |
|
|
RESIN), HEAVY WALLED |
| * |
MIL-P-22324A |
THERMOSET EPOXY RESIN SHEET, PAPER REINFORCED |
| * |
MIL-P-22536 |
LOW DENSITY POLYETHYLENE |
| * |
MIL-M-22544 |
SUPERSEDED BY L-P-1183 |
| L |
MIL-P-22581B(1) |
PLASTIC SHEET, VIBRATION DAMPING (TYPE MI-D2) |
| * |
MIL-T-22742 |
INSULATION TAPE, ELECTRICAL, PRESSURE SENSITIVE, TEFLON TFE RESIN |
| * |
MIL-P-22748A |
PLASTIC MATERIAL FOR MOLDING AND EXTRUSION HIGH DENSITY |
|
|
POLYETHYLENE |
|
MIL-I-23053C(2) |
INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL |
|
|
SPECIFICATION FOR |
| Q |
MIL-T- 23142B |
TAPE, PRESSURE SENSITIVE ADHESIVE, FOR DISSIMILAR METAL SEPARATION |
| L |
MIL-P-23536A |
POLYETHYLENE PLASTIC SHEET, VIRGIN AND BORATED |
|
MIL-I-23594B |
INSULATION TAPE, ELECTRICAL, HIGH TEMPERATURE, POLYTETRAFLUORO- |
|
|
ETHYLENE, PRESSURE SENSITIVE |
| L |
MIL-P-24191C |
PLASTIC SHEET, CAST, ACRYLIC, SHIPBOARD APPLICATION (ILLUMINATED AND |
|
|
SIGNAL LIGHTING) |
| QL |
MIL-I-24204A |
INSULATION, ELECTRICAL, HIGH TEMPERATURE, BONDED, SYNTHETIC FIBRE |
|
|
PAPER |
| QL |
MIL-M-24325(2) |
MOLDING MATERIAL PLASTIC, EPOXY COMPOUNDS, THERMOSETTING |
| L |
MIL-P-24333(2) |
PLASTIC, UNICELLAR, SHEET, ELASTOMERIC |
| L |
MIL-P-24364(2) |
PLASTIC SHEET, LAMINATED, THERMOSETTING, ELECTRICAL INSULATING |
|
|
SHEET, GLASS MAT |
| L |
MIL-P-24364/1(3) |
PLASTIC SHEET, LAMINATED, THERMOSETTING, ELECTRICAL INSULATING |
|
|
POLYESTER, GLASS MAT GRADE GPO-N1 |
| L |
MIL-P-24364/2(3) |
PLASTIC SHEET, LAMINATED, THERMOSETTING, ELECTRICAL INSULATING |
|
|
POLYESTER, GLASS MAT GRADE GPO-N2 |
| L |
MIL-P-24364/3(3) |
PLASTIC SHEET, LAMINATED, THERMOSETTING, ELECTRICAL INSULATING |
|
|
POLYESTER, GLASS MAT GRADE GPO-N3 |
| Q |
MIL-I-24391A(2) |
INSULATION TAPE, ELECTRICAL, PLASTIC, PRESSURE SENSITIVE |
|
MIL-M-24519B(6) |
MOLDING PLASTICS, POLYESTER AND POLYARYLETHER THERMOPLASTIC |
| Q |
MIL-P-25374A(1) |
PLASTIC SHEET, ACRYLIC, MODIFIED, LAMINATED |
|
MIL-P-25395A |
PLASTIC, HEAT RESISTANT, LOW PRESSURE LAMIN. GLASS FIBRE BASE, |
|
|
POLYESTER RESIN |
|
MIL-P-25421B |
PLASTIC MATERIAL, GLASS FIBRE BASE, EPOXY RESIN, LOW PRESSURE |
|
|
LAMINATED |
|
MIL-P-25515C |
PLASTIC MATERIAL, PHENOLIC RESIN, GLASS FIBRE BASE, LAMINATED |
|
MIL-P-25518B |
PLASTIC MATERIALS, SILICONE RESIN, GLASS FIBRE BASE, LOW PRESSURE |
|
|
LAMINATED |
| Q |
MIL-P-25690A(3) |
PLASTIC SHEET AND PARTS, MODIFIED ACRYLIC BASE, MONOLITHIC, CRACK |
|
|
PROPAGATION RESISTANT |
| L |
MIL-P-25770A |
PLASTIC MATERIAL, ASBESTOS BASE, PHENOLIC RESIN, LOW OR HIGH |
|
|
PRESSURE LAMINATES (ASG) |
| * |
MIL-P-26692 |
PLASTIC TUBES AND TUBING, POLYETHYLENE |
| L |
MIL-P-27538A |
PLASTIC SHEET FEP FLUOROCARBON UNFILLED, COPPER CLAD |
| * |
MIL-T-27730A |
TAPE, ANTISEIZE, TETRAFLUOROETHYLENE, WITH DISPENSER |
|
MIL-P-38727 |
TAPE, PROTECTIVE, PRESSURE SENSITIVE |
|
MIL-P-40619A |
PLASTIC, CELLULAR, POLYSTYRENE (FOR BUOYANCY) |
|
MIL-T-43036B(1) |
TAPE, PRESSURE SENSITIVE ADHESIVE, PLASTIC FILM (FOR SEALING FIBRE |
| * |
|
CONTAINERS AND CANS) |
| L |
MIL-P-43037 |
THERMOSET PHENOLIC RESIN ROD, NYLON REINFORCED |
|
MIL-P-43038B |
PLASTIC MOLDING MATERIAL, POLYESTER, LOW PRESSURE LAMINATED, HIGH |
| L |
|
TEMPERATURE RESISTANCE |
| L |
MIL-P-43043C |
PLASTIC MOLDING MATERIAL, PRE-MIX, POLYESTER, GLASS FIBRE REINFORCED |
|
MIL-P-43081B |
PLASTIC MOLDING MATERIAL (PLOTTING AND IMPREGNATING), POLYETHYLENE, |
| L |
|
LOW MOLECULAR WEIGHT |
| L |
MIL-P-43090B |
PLASTIC MOLDING MATERIAL, ASPHALT, ASBESTOS FILLED |
| L |
MIL-P-43604A |
PLASTIC TUBING (FLEXIBLE, POLYURETHANE FILM) |
| * |
MIL-P-46036B |
PLASTIC SHEET, RODS, TUBES, AND DISCS, POLYCHLOROTRIFLUOROETHYLENE |
| * |
MIL-P-46040A |
PLASTIC SHEET, HEAT RESISTANT, GLASS FABRIC REINFORCED |
|
MIL-P-46041 |
PLASTIC SHEET, FLEXIBLE VINYL |
|
MIL-A-46050C(2) |
ADHESIVE, CYANOACRYLATE, RAPID ROOM TEMPERATURE CURING, |
| Q |
|
SOLVENTLESS |
|
MIL-P-46058C(6) |
INSULATING COMPOUND, ELECTRICAL (FOR COATING PRINTED CIRCUIT |
| * |
|
ASSEMBLIES) |
| L |
MIL-P-46060 |
PLASTIC MATERIAL NYLON |
|
MIL-P-46067B |
PLASTIC EMBEDDING COMPOUND, EPOXY RESIN SYSTEM |
|
MIL-M-46069(2) |
MOLDING PLASTIC, GLASS/EPOXY PRE-MIX |
| L |
MIL-A-46106A(2) |
ADHESIVE SEALANTS, SILICONE, RTV, GENERAL PURPOSE |
| L |
MIL-P-46109C |
PLASTIC MOLDING MATERIAL, POLYPROPYLENE, GLASS FIBRE REINFORCED |
| L |
MIL-P-46112B |
PLASTIC SHEET AND STRIP, POLYIMIDE |
| L |
MIL-P-46115B |
PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE |
| L |
MIL-P-46120B |
PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYSULFONE |
| * |
MIL-P-46121B |
PLASTIC SHEET AND COATING MATERIAL, PARAXYLYLENE POLYMERS |
| L |
MIL-P-46122 |
PLASTIC MOLDING MATERIAL, POLYVINYLIDENE FLUORIDE-KYNAR |
|
MIL-P-46122B |
PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYVINYLIDENE FLUORIDE |
| L |
|
POLYMER AND COPOLYMER |
|
MIL-P-46124B |
PLASTIC MOLDING AND EXTRUSION MATERIAL, IONOMER RESINS |
|
MIL-P-46129A |
PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE, |
|
|
MODIFIED |
|
MIL-P-46131B |
PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE, |
| L |
|
MODIFIED, GLASS FIBRE REINFORCE |
|
MIL-P-46133A |
PLASTIC MOLDING AND EXTRUSION MATERIAL, POLY (ARYL SULFONE ETHER) |
|
|
RESIN, THERMOPLASTIC |
|
MIL-P-46137A |
PLASTIC MOLDING AND EXTRUSION MATERIAL, ACETAL, GLASS FIBRE |
|
|
REINFORCED |
|
MIL-P-46140B |
PLASTIC SHEET, PRESSURE SENSITIVE, ADHESIVE COATED, CELLULOSE |
| L |
|
ACETATE, TRANSPARENT |
|
MIL-P-46144B |
PLASTIC SHEET, POLYCARBONATE |
|
MIL-A-46146A(2) |
ADH.-SEALANTS, SILICONE, RTV, NON-CORROSIVE (FOR USE WITH SENSITIVE |
| L |
|
METALS AND EQUIPMENT) |
|
MIL-P-46161A |
PLASTIC MOLDING MATERIAL, POLYTEREPHTHALATE THERMOPLASTIC, GLASS |
| L |
|
FIBRE REINFORCED |
| L |
MIL-P-46166(1) |
PLASTIC LAMINATES, GLASS REINFORCED (FOR USE IN ARMOR COMPOSITES) |
|
MIL-P-46169A |
PLASTIC, SHEET MOLDING COMPOUND, POLYESTER, GLASS FIBRE REINFORCED |
| L |
|
(FOR GENERAL PURPOSE) |
| L |
MIL-P-46179 |
PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYAMIDE IMIDE |
| L |
MIL-P-46180 |
PLASTIC MOLDING MATERIAL, POLYAMIDE (NYLON), GLASS FIBRE REINFORCED |
|
MIL-P-46181 |
PLASTIC MOLDING MATERIAL, POLYAMIDE (SUPER TOUGH NYLON) |
|
MIL-P-46183 |
PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYETHERETHERKETONE |
| L |
|
(PEEK) |
|
MIL-P-46184 |
PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYETHERIMIDE (PEI) |
| L |
MIL-P-46185 |
PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYETHERSULFONE |
| L |
MIL-M-46861A |
MOLDING MATERIAL, GLASS MAT. EPOXY COATED |
| L |
MIL-M-46862A |
MOLDING MATERIAL, GLASS, EPOXY IMPREGNATED |
| L |
MIL-M-46891A |
MOLDING COMPOUND, PHENOLIC RESIN, ASBESTOS REINFORCED |
| L |
MIL-P-46892A |
PLASTIC MOLDING MATERIAL, EPOXY, GLASS FIBRE |
| L |
MIL-R-47211(1) |
RUBBER, SILICONE, ROOM TEMPERATURE CURING |
| L |
MIL-P-51402 |
PLASTIC SHEET, POLYPROPYLENE POLYETHYLENE LAMINATE FILM |
| L |
MIL-P-51403 |
PLASTIC SHEET, VINYL, FLEXIBLE |
| L |
MIL-P-51406A |
PLASTIC SHEET, VINYL CHLORIDE POLYMER AND COPOLYMER, FLEXIBLE |
|
MIL-P-51431 |
PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE BUTENE 1 |
| L |
|
COPOLYMER, HIGH DENSITY |
| L |
MIL-P-51432 |
PLASTIC, POLYETHYLENE BUTENE 1 COPOLYMER |
| * |
MIL-P-51433 |
PLASTIC TUBE, POLYETHYLENE BUTENE 1 COPOLYMER |
|
MIL-P-52189 |
THERMOSET PHENOLIC RESIN TUBE, NYLON REINFORCED |
| L |
MIL-P-55010A |
PLASTIC SHEET, POLYETHYLENE TEREPHTHALATE |
| * |
MIL-S-55557A(1) |
SHELTER ELECTRICAL EQUIP.S-330()/TRC-117(V) |
|
MIL-P-55617 |
PLASTIC SHEET, FIBERGLASS AND EPOXY RESIN, THIN GAUGE |
|
MIL-P-58102(1) |
PLASTIC SHEET AND LAMINATES, FLEXIBLE, FOR ENVIRONMENTAL PROTECTIVE |
| L |
|
STORAGE AND SHIPPING SYS |
|
MIL-P-63462 |
PLASTIC MOLDING AND EXTRUSION MATERIAL, ETHYCELLULOSE, FOR ROCKET |
| L |
|
GRAIN INHIBITING MAT'LS |
| * |
MIL-P-81255A |
PLASTIC MOLDING MATERIAL, ASBESTOS PHENOLIC |
|
MIL-T-81287 |
TAPE, PRESSURE SENSITIVE ALUMINUM FOIL, SILICONE ADHESIVE |
| L |
MIL-P-81390 |
PLASTIC MOLDING MATERIAL,POLYCARBONATE, GLASS FIBRE REINFORCED |
|
MIL-P-82540(1) |
PLASTIC MATERIAL, POLYESTER RESIN, GLASS FIBRE BASE, FILAMENT WOUND |
| L |
|
TUBE |
| L |
MIL-P-82650(1) |
PLASTIC MOLDING MATERIAL, GLASS PHENOLIC |
| L |
MIL-P-83310 |
PLASTIC SHEET, POLYCARBONATE, TRANSPARENT |
|
MIL-M-87176 |
MOLDING MATERIAL, POLYPROPYLENE MODIFIED MECHANICAL ONLY |
