Farco Plastics Supply, Inc.
My Store

 

 


SKU: PRIC.100-24A
$8.98
Recommend Or Share:
0.100 ACRYLIC LENSE SHEET CLR PRIZMATIC 1 SIDE LIGHT DEFUSING
UOM: EA Mask Type: NONE
Minimum Order Size: 1 EA Full Size: 24 PACK
Trade Names: NaturaLux, Paralite

ACRYLIC LENSES

We display our prices with no discounts applied. Please provide some information below and we will create a custom quote for you. Quotes requests sent Monday through Friday 8:00 am to 4:30 pm will be responded to in 30 minutes or less. Quote requests received out side of working hours will be responded to by 8am of the next work day.

Quote Request Form

PMMA (PolyMethylMethAcrylate) aka Acrylic
Average Value (AV) is the average test score returned for that test.
Grade Count (GC) is the number of samples from different manufactures that were tested.
 
Physical PropertiesMetricEnglishComments AV(Average Value)
Density 1.13 - 1.19 g/cc0.0408 - 0.0430 lb/inAV: 1.18 g/cc Grade Count:37
Water Absorption 0.200 - 2.00 %0.200 - 2.00 %AV: 0.663 % Grade Count:23
Moisture Absorption at Equilibrium 0.300 - 0.360 %0.300 - 0.360 %AV: 0.312 % Grade Count:5
Water Absorption at Saturation 0.300 - 2.10 %0.300 - 2.10 %AV: 1.70 % Grade Count:9
Moisture Expansion 0.500 - 0.800 %0.500 - 0.800 %AV: 0.583 % Grade Count:6
Moisture Vapor Transmission 55.0 - 56.0 cc-mm/m-24hr-atm140 - 142 cc-mil/100 in-24hr-atmAV: 55.3 cc-mm/m-24hr-atm Grade Count:3
Linear Mold Shrinkage 0.00200 - 0.00800 cm/cm0.00200 - 0.00800 in/inAV: 0.00468 cm/cm Grade Count:11
Melt Flow 0.500 - 7.00 g/10 min0.500 - 7.00 g/10 minAV: 2.16 g/10 min Grade Count:23
 
Mechanical PropertiesMetricEnglishComments AV(Average Value)
Hardness, Rockwell M 45.0 - 10145.0 - 101AV: 79.9 Grade Count:18
Ball Indentation Hardness 100 - 175 MPa14500 - 25400 psiAV: 149 MPa Grade Count:8
Tensile Strength, Ultimate 29.0 - 75.0 MPa4210 - 10900 psiAV: 58.4 MPa Grade Count:31
 35.0 - 100 MPa
@Temperature -40.0 - 70.0 C
5080 - 14500 psi
@Temperature -40.0 - 158 F
AV: 67.5 MPa Grade Count:4
Tensile Strength, Yield 45.0 - 86.0 MPa6530 - 12500 psiAV: 73.7 MPa Grade Count:5
Elongation at Break 3.50 - 59.0 %3.50 - 59.0 %AV: 16.1 % Grade Count:29
Elongation at Yield 4.00 - 6.00 %4.00 - 6.00 %AV: 5.25 % Grade Count:4
Modulus of Elasticity 1.80 - 3.30 GPa261 - 479 ksiAV: 2.96 GPa Grade Count:19
Flexural Yield Strength 38.0 - 142 MPa5510 - 20600 psiAV: 92.7 MPa Grade Count:29
Flexural Modulus 1.20 - 3.38 GPa174 - 490 ksiAV: 2.60 GPa Grade Count:18
Compressive Yield Strength 103 MPa14900 psiAV: 103 MPa Grade Count:4
Poissons Ratio 0.370 - 0.4300.370 - 0.430AV: 0.402 Grade Count:6
Fatigue Strength 38.0 MPa5510 psiAV: 38.0 MPa Grade Count:3
Shear Modulus 0.629 - 1.70 GPa91.2 - 247 ksiAV: 1.08 GPa Grade Count:6
Izod Impact, Notched 0.147 - 0.588 J/cm0.275 - 1.10 ft-lb/inAV: 0.309 J/cm Grade Count:10
Izod Impact, Notched (ISO) 1.60 - 8.10 kJ/m0.761 - 3.85 ft-lb/inAV: 4.20 kJ/m Grade Count:15
Charpy Impact Unnotched 1.00 J/cm - NB4.76 ft-lb/in - NBAV: 3.90 J/cm Grade Count:21
Charpy Impact, Notched 0.200 - 6.40 J/cm0.952 - 30.5 ft-lb/inAV: 0.846 J/cm Grade Count:16
Falling Dart Impact 10.8 - 20.6 J8.00 - 15.2 ft-lbAV: 14.9 J Grade Count:3
Coefficient of Friction 0.450 - 0.8000.450 - 0.800AV: 0.583 Grade Count:3
Tensile Creep Modulus, 1 hour 1400 - 2700 MPa203000 - 392000 psiAV: 2350 MPa Grade Count:4
Tensile Creep Modulus, 1000 hours 1000 - 1800 MPa145000 - 261000 psiAV: 1580 MPa Grade Count:4
 
Electrical PropertiesMetricEnglishComments AV(Average Value)
Electrical Resistivity 1.00e+14 - 1.00e+15 ohm-cm1.00e+14 - 1.00e+15 ohm-cmAV: 7.60e+14 ohm-cm Grade Count:15
Surface Resistance 1.00e+12 - 1.00e+14 ohm1.00e+12 - 1.00e+14 ohmAV: 8.08e+13 ohm Grade Count:13
Shielding Effectiveness 26.0 - 33.0 dB26.0 - 33.0 dBAV: 30.7 dB Grade Count:5
Dielectric Constant 2.80 - 4.002.80 - 4.00AV: 3.39 Grade Count:11
Dielectric Strength 15.0 - 60.0 kV/mm381 - 1520 kV/inAV: 25.7 kV/mm Grade Count:13
Dissipation Factor 0.0300 - 0.06000.0300 - 0.0600AV: 0.0445 Grade Count:11
Comparative Tracking Index 600 V600 VAV: 600 V Grade Count:8
 
Thermal PropertiesMetricEnglishComments AV(Average Value)
CTE, linear 60.0 - 110 m/m-C33.3 - 61.1 in/in-FAV: 73.5 m/m-C Grade Count:20
 72.0 - 72.0 m/m-C
@Temperature 0.000 - 156 C
40.0 - 40.0 in/in-F
@Temperature 32.0 - 312 F
AV: 72.0 m/m-C Grade Count:1
Specific Heat Capacity 1.47 J/g-C0.351 BTU/lb-FAV: 1.47 J/g-C Grade Count:8
Thermal Conductivity 0.190 W/m-K1.32 BTU-in/hr-ft-FAV: 0.190 W/m-K Grade Count:4
Maximum Service Temperature, Air 65.0 - 180 C149 - 356 FAV: 98.9 C Grade Count:10
Deflection Temperature at 0.46 MPa (66 psi) 81.0 - 101 C178 - 214 FAV: 94.2 C Grade Count:19
Deflection Temperature at 1.8 MPa (264 psi) 60.0 - 103 C140 - 217 FAV: 88.3 C Grade Count:24
Vicat Softening Point 66.0 - 113 C151 - 235 FAV: 97.4 C Grade Count:34
Glass Transition Temp, Tg 105 - 110 C221 - 230 FAV: 107 C Grade Count:3
Flammability, UL94 HBHBGrade Count:11
Flash Point 430 C806 FAV: 430 C Grade Count:4
 
Optical PropertiesMetricEnglishComments AV(Average Value)
Refractive Index 1.49 - 1.491.49 - 1.49AV: 1.49 Grade Count:20
Haze 0.200 - 3.00 %0.200 - 3.00 %AV: 1.10 % Grade Count:10
Transmission, Visible 50.0 - 93.0 %50.0 - 93.0 %AV: 77.9 % Grade Count:31
UV Transmittance 0.000 - 80.0 %0.000 - 80.0 %AV: 10.3 % Grade Count:8
Reflection Coefficient, Visible (0-1) 0.0330 - 0.04000.0330 - 0.0400AV: 0.0391 Grade Count:8
 
Processing PropertiesMetricEnglishComments AV(Average Value)
Processing Temperature 70.0 - 270 C158 - 518 FAV: 135 C Grade Count:9
Nozzle Temperature 220 - 245 C428 - 473 FAV: 233 C Grade Count:3
Adapter Temperature 230 - 240 C446 - 464 FAV: 235 C Grade Count:3
Die Temperature 220 - 240 C428 - 464 FAV: 230 C Grade Count:3
Melt Temperature 150 - 249 C302 - 480 FAV: 218 C Grade Count:5
Mold Temperature 32.2 - 90.0 C90.0 - 194 FAV: 64.5 C Grade Count:7
Roll Temperature 80.0 - 100 C176 - 212 FAV: 90.0 C Grade Count:3
Drying Temperature 70.0 - 90.0 C158 - 194 FAV: 77.3 C Grade Count:7
Injection Pressure 78.4 - 147 MPa11400 - 21300 psiAV: 110 MPa Grade Count:5